Install guide: PB-AS piggyback splitter
Runs two ONYX harnesses off one piggyback adaptor, for example driving lights and a light bar.

Open the full-size guide to print or save
Download the printable guide (PDF)
Before you start
- Ignition off, key out, battery negative (–) off before you start. It goes back on last.
- Keep wiring clear of the exhaust, fan, belts and steering. Cable-tie everything.
- Not confident with 12 V wiring? An auto electrician will have it done in no time.
Fit it
- Fit your piggyback adaptor as per its own guide.
- Plug the splitter into the adaptor's white T-plug.
- Plug each splitter output into its own ONYX harness.
- Test it: high beam with the switch on, lights on. Low beam, lights off. Your headlights work as normal.
Not sure it suits your set-up? Call 1300 028 034 before you order.
Not sure about a step? Call 1300 028 034 or email info@onyxlights.com.au with your rig's make, model and year.








































































































































































